 |
|
|
|
|
|
|
| |
Home >
Unitex Granular Marble >
Unitex Wall Cladding
UNITEX WALL CLADDING
Specify Product :
Index |
|
EXAMPLE UNI-TWS SPECIFICATION
The external facade (insulating lightweight cladding) shall be the Uni-TWS® as described under CSIRO Appraisals Technical Assessment #310, and detailed in the Uni-TWS® Manual (dated October 2003). It shall have the following characteristics:
- Soft-body Impact Strength minimum of 45 joules.
- Minimum coating thickness of 10mm of fibre reinforced render.
- Edge and Sill Reveals* with minimum 20mm thickness returns.
- A 'complete wall' R-value tested result of 2.17 (based on 75mm thick EPS foam fitted over typical stud framing).
It shall be supplied by Unitex Granular Marble Pty Ltd and shall be installed as per the Uni-TWS® Manual by skilled tradespeople.
Unitex Granular Marble Pty Ltd 22 Park Drive, Dandenong, Victoria, 3175 Australia
Telephone: (03) 9768 4900 Facsimile: (03) 9768 4999 E-mail: sales@unitex.com.au Website: www.unitex.com.au
Also available from:
State Franchises SA Ph: (08) 8262 7900, WA Ph: (08) 9248 8788,
Branches NSW/QLD Ph: (02) 9648 5878
* Patent Pending.
EXAMPLE UNI-BASE BOARD SPECIFICATION
The external facade (insulating lightweight cladding) shall be the Uni-Base Board™ System (Low Build) as detailed in the Uni-Base Board™ Manual (dated February 2007). It shall have the following characteristics:
- Soft-body Impact Strength minimum of 20 joules.
- Minimum coating thickness of the Uni-Base Board system is to be no less than 5 mm.
- Edge and Sill Reveals protected with Uni-Mesh IM250 and Uni-304 Angle.
- Expansion Joints to be specified to allow for normal substrate movement.
It shall be supplied by Unitex Granular Marble Pty Ltd and shall be installed as per the Uni-Base Board™ Manual by skilled tradespeople.
Unitex Granular Marble Pty Ltd 22 Park Drive, Dandenong, Victoria, 3175 Australia
Telephone: (03) 9768 4900 Facsimile: (03) 9768 4999 E-mail: sales@unitex.com.au Website: www.unitex.com.au
Also available from:
State Franchises SA Ph: (08) 8262 7900, WA Ph: (08) 9248 8788,
Branches NSW/QLD Ph: (02) 9648 5878 |
All products contained herein © Unitex Granular Marble. Page layout © 1996-2008 Architecture Media (Selector) Pty Ltd.
All rights reserved.
|
|
|
|
Photographs