 |
|
|
|
|
|
|
| |
Home >
Stramit Building Products >
Rainwater Products
RAINWATER PRODUCTS
Specify Product :
Index |
|
Specification Guide:
The [product type - e.g. gutter] shall be Stramit [product name - e.g. M Pattern] or agreed exact equivalent in size and performance. Material shall be protected steel sheet to Australian Standard AS 1397 with a minimum yield stress of 550MPa* and an AZ 150 zinc-aluminium coating* [with a (nominate colour) oven baked paint film]. All accessories are to be fully compatible as recommended by the manufacturer. The product and its accessories shall be installed strictly in accordance with the manufacturer's recommendations. Flashings and all adjacent products shall be supplied in compatible materials as specified. All work shall be fixed in a workman like manner, leaving the job clean and weather tight. All debris (screws, rivets, cuttings and filings, etc) shall be cleaned off daily. Repair ail minor blemishes with touch up paint supplied by the manufacturer.
Note: *some products supplied in 300MPa steel with galvanised Z275 coating.
A similar specification for each product is contained in the Stramit CD-ROM 'Solutions in Steel', and can easily be loaded onto your documentation via the clipboard function. Please contact Stramit for a copy.
Example:
The gutter shall be Stramit Tuffer Compact Gutter with an effective cross sectional area of 6555 sq. mm and overflow slots at no more than 110mm centres. Gutter material shall be protected steel sheet to Australian Standard AS1397 with a minimum yield stress of 550MPa (grade 550) and an AZ150 zinc-aluminium coating with or without an oven baked paint film of selected colour.
The gutter shall be installed in accordance with manufacturers recommendations. The fascia clips/brackets supplied shall be attached to the fascia/barge at a maximum of 1.2 metre centres, using the recommended fixings. Flashings shall be supplied in compatible materials as specified. All work shall be fixed in a workman like manner, leaving the job clean and weather tight. All debris (screws, rivets, cuttings and filings, etc) shall be cleaned off daily. Repair all minor blemishes with touch up paint supplied by the manufacturer.
|
All products contained herein © Stramit Building Products. Page layout © 1996-2008 Architecture Media (Selector) Pty Ltd.
All rights reserved.
|
|
|
|
Photographs