Thickness/Mass
Stramit Condeck HP® Decking is generally offered in three standard base metal thicknesses of 0.75mm, 0.90mm and 1.0mm. Other thicknesses may be supplied based on lead times and availability. Stramit Condeck HP Plus™ End Span Accessory is generally offered in 1.0mm base metal thickness.
Materials
Stramit Condeck HP® Decking is manufactured from high-tensile (G550) steel with a Z350/Z450* galvanised coating, in full conformance with AS1397. Stramit Condeck HP Plus™ End Span Accessory is manufactured from high-tensile (G550) steel with a Z275 galvanised coating (please note that Stramit Condeck HP Plus™ End Span Accessory is always fully embedded within the finished slab).
It is also possible to supply Stramit Condeck HP® Decking with the underside Colorbond coated. Supply would be subject to project size and lead-time.
*It is anticipated that, in the near future, industry standardisation of coating thickness for composite decking will occur.
Compatibility
Direct contact between galvanised steel and copper, or water run-off from copper onto galvanised steel must be avoided, as premature corrosion will result.
Photographs