 |
|
|
|
|
|
|
| |
Home >
Stramit Building Products >
Commercial Roofing
COMMERCIAL ROOFING
Specify Product :
Speed Deck Ultra® |
|
|
Speed Deck Ultra®
|
The roofing/walling shall be ..... mm BMT Stramit Speed Deck Ultra in continuous lengths with trapezoidal ribs 43mm high, spaced at 233mm centres. Sheeting material shall be protected steel sheet to Australian Standard AS1397 with a minimum yield stress of 550MPa (Grade G550) and an AZ150 zinc-aluminium coating with or without an oven-baked paint film of selected colour.
The sheeting shall be fixed to the purlins/girts in accordance with the manufacturer’s recommendations using patented full length fixing clips supplied. Clips shall be fastened to purlins/girts with screws supplied in accordance with Australian Standard AS3566, Class 3, and attached at every rib. Sheets shall be laid in such a manner that the approved side lap faces away from the prevailing weather. A minimum of 50mm shall be provided for projection into gutters. Flashings shall be provided in compatible materials as specified, minimum cover of flashing shall be 150mm.
All sheeting shall be fixed in a workman-like manner, leaving the job clean and weathertight. Repair minor blemishes with touch-up paint supplied by the roof manufacturer. All debris (nuts, screws, cuttings, filings etc.) shall be cleaned off daily. |
|
|
All products contained herein © Stramit Building Products. Page layout © 1996-2008 Architecture Media (Selector) Pty Ltd.
All rights reserved.
|
|
|
|
Photographs