 |
|
|
|
|
|
|
| |
Home >
Pyrotek >
Wavebar Flexible Noise Barrier
WAVEBAR FLEXIBLE NOISE BARRIER
Technical Data :
Index |
|
It's common practice in today's office buildings to install acoustic barriers in the ceiling plenum to stop noise transmission from one office to another, via the cavity in the ceiling space.
A typical and more expensive method is using the stud and plasterboard wall. The ceiling cavity is not an easy space to work in and is normally cluttered with pipes, ducts, light fittings and ceiling support metal work. It's very difficult to get 100% seal.
Made of a special barium-loaded vinyl material, Wavebar is very flexible and easy to install even in and around awkward places - or drape - or join into mats and enclosures - to greatly reduce noise transmission.
A variant, Wavebar Quadzero, is manufactured with an aluminium finish.
| Construction: |
100% polyester fabric, barium-loaded vinyl. |
| Weights: |
2, 4, 6, 8 and 10 kg/m² |
| Roll widths: |
1350 mm |
| Roll lengths: |
Up to 20 m |
| Roll weights: |
All rolls exceed 30 kg and must be handled by at least two people |
| Specific gravity: |
2.2 g/cm³ |
|
All products contained herein © Pyrotek. Page layout © 1996-2008 Architecture Media (Selector) Pty Ltd.
All rights reserved.
|
|
|
|
Photographs