Specify INVISTA Antron®  Carpet Fibre to have your carpet manufactured for any commercial project, either from stock or custom designed from the following mills:

• Interface Carpets
  
• Ontera Modular Carpets
• Feltex Carpets

Loop pile broadloom

2.1.1.1 Yarn: 100% first quality, bulk continuous filament nylon type 6,6 offering a construction standards testing program by a fibre producer. Fiber shape to have maximum Modification Ratio of 2.5 for soil release capabilities. Fibre identification to AATCC 20.

2.1.1.2 Static Control: By permanent means(i.e. antistatic filaments) and without chemical treatment, static generation below 3.5 kilovolts under standard conditions of 65 degrees F and 20% relative humidity. Electrostatic Propensity (Static delayed signal): to AATCC 134.

2.1.1.3 Construction: tufted, level or multi-level loop pile with maximum height variation of 1/16 inch.

2.1.1.4 Dye Method: 100% Solution dyed

2.1.1.5 Pile Weight: ( ) oz/yd² minimum

2.1.1.6 Pile Thickness: ( ) mm maximum

2.1.1.7 Primary Backing: polypropylene

2.1.1.8 Secondary Backing: woven polypropylene/latex

2.1.1.9 Resistance to Delamination: AS2111.16 minimum bond strength 50 Newtons per 50mm

2.1.1.10 Tuft Bind: AS2111.15 force to withdraw individual tufts not less than 30 Newtons

2.1.1.11 Flammability: ASISO2939-1 radiant flux value depends on building classification and whether sprinklers are fitted

2.1.1.12. Colorfastness to Light: AATCC 16E, 160 AFUs, International Gray Scale for Color Change rating min 3-4.

2.1.1.13. Colorfastness to atmospheric contaminants: AATCC 164 (ozone) & AATCC 129 (oxides of nitrogen) for 2 cycles, International Gray Scale for Color Change rating min. 3.

2.1.1.14. Stain Resistance - AATCC 138 for 5 washings to simulate removal of topical treatments by hot water extraction, followed by: AATCC 175, level 6 using AATCC Red Dye 40 Scale.

2.1.1.15. Soil Resistance: protective anti-soil treatment heat applied by carpet manufacturer.

2.1.1.16 Appearance Retention – TUC247/251 hexapod test rating 3.0 or greater after 16,000 cycles

The specifier reserves the right to choose the appropriate product, based on weighted evaluation.

General Disclaimer

While every effort has been made to ensure that the information contained within these specifications is comprehensive and accurate, INVISTA will not accept any liability for omissions or errors, and disclaim any and all liability that may be claimed arising out of reliance upon the information presented in these specifications. The user acknowledges that any reliance upon these specifications is at their sole risk and discretion. INVISTA has no obligation to correct any error or omission in any portion of these specifications.

INVISTA. makes no representations concerning suitability or fitness for use of these specifications and expressly disclaim any and all warranties, express or implied, including without limitation warranties of fitness for a particular purpose.