 |
|
|
|
|
|
|
| |
Home >
Gainsborough Architectural Hardware >
Locksets & Deadbolts
LOCKSETS & DEADBOLTS
Install, Maintain :
4500 Series |
|
|
4500 Series
|
Door thickness
Fits 35mm to 50mm (1 3/8" - 2") door thickness (wood or metal door installation)
Cylinder
The Gainsborough standard brass cylinder features 6 pin tumbler and C4 keyway.
Two brass keys supplied as standard.
Latch
12.7mm throw, fire rated. Reversible for right or left handed doors. Solid Brass latchbolt.
Faceplate is self adjusting to accommodate bevelled or flat doors.
Faceplate size 58mm x 25mm.
Handing
Non-handed: can be used on right or left hand doors, open in or out.
Strike
70mm x 29mm x 1.5mm standard universal strike. Strike box furnished.
Trim
Zinc based levers, which are plated to match trim finish.
All other parts are made of brass or stainless steel.
Door preparation
54mm (2 1/8") cross bore and 25mm (1') edge bore.
Lever Dimensions
- 4500 Series: Lever length is 136mm, featuring a 9.5mm return and a projection over 50mm from the face of door.
4600 Series: Lever length is 130mm, curved in design, with a projection over 50mm from the face of door.
Keying Information
6 pin tumbler cylinder supplied in the standard broach, keyed to differ with 2 keys per lock. Special keying is available.
All Gainsborough locksets come with brass keys.
Standard keyed differently (KD) unless otherwise specified. Locks also can be keyed to following systems:
- KA Keyed Alike
- MK Master Keyed
- GMK Grand Master Keyed
- GGMK Great Grand Master Keyed
- MA Maison Keyed
- PK Project Keyed
- PMK Project Master Keyed
|
|
|
All products contained herein © Gainsborough Architectural Hardware. Page layout © 1996-2008 Architecture Media (Selector) Pty Ltd.
All rights reserved.
|
|
|
|
Photographs