 |
|
|
|
|
|
|
| |
Home >
Gainsborough Architectural Hardware >
Exit Devices
EXIT DEVICES
Features :
Touchbar |
|
|
Touchbar
|
All of the Exidor Touchbar range has been certified to BS EN 1125 and are non-handed. Classification No. 37601322B.
The Touchbar range includes a dogging device as standard operated by the allen key supplied.
All Exidor Touchbars also have features such as the pad fitting over the mechanism unit and the angled lip, which prevent the units being jammed intentionally.
The horizontal bar also includes cut outs to grip the unit to be able to pull the door shut after use. Both the single deadlocking latch units and the three point locking units also include an anti-thrust.
Exidor 400
Touchbar Deadlocking Latch to suit doors up to 900mm wide.
Exidor 401
Touchbar Deadlocking Latch to suit doors up to 1200mm wide.
Exidor 402
Touchbar two point locking with Vertical catches for doors up to 900mm wide.
Exidor 403
Touchbar two point locking with Vertical catches for doors up to 1200mm wide.
Exidor 404
Touchbar three point locking - to suit doors up to 900mm wide and 2440mm high.
Exidor 405
Touchbar three point locking - to suit doors up to 1200mm wide and 2440mm high.
Note: For doors that have a glass panel it is recommended that a diagram showing the position of the glass panel is supplied with the order so that the units can be cut to the correct size.
|
|
|
All products contained herein © Gainsborough Architectural Hardware. Page layout © 1996-2009 Architecture Media (Selector) Pty Ltd.
All rights reserved.
|
|
|
|
Photographs