a. Ultramat (Carpet Inserts)
b. Duramat (Rubber/Vinyl Inserts)
c. Duragrit (Abrasive Inserts)
d. Cocamat (Coir Inserts)

______________recessed or surface mounted entry mat as indicated on the drawings.

Mats will be constructed from natural aluminium tread rails lightly furrowed on the exposed surface to provide a non-skid surface and include rubber support cushions mounted on base of each tread to counter any minor surface imperfections.
Treads are spaced at 50mm centres.

Note: Up to 6 metres wide without joins.

TREAD INSERTS:

1. Carpet will be selected from ________________range.
   Heavy Duty MELCOR "ORBIT" Carpet (Range of 12 colours) or "ONTERA" C.S.N. (range of 24 Colours)
2. Black ribbed rubber scraping bars
   Grey ribbed vinyl (for interior use only).
3. Abrasive grit, heavy duty anti-slip (Charcoal)
4. Natural coir fibre: allow 10mm clearance above aluminium treads to ensure hinged doors have sufficient clearance.
   

MATWELL FRAMES will be fabricated from_______________

1. 12 x 20 x 3mm
2. 20 x 25 x 3mm
3. 25 x 25 x 3mm

natural aluminium or brass angle complete with

1. Fully Welded Joints or
   
2. 'Clip-in' corner brackets or
   
3. Mitred and drilled for screw fixing.
   Install in position so that the upper edge of the frame is flush with adjacent floor surfaces and anchor down as required.
   
4. Ramping strip, 63mm wide, for surface mounted applications X height of mat.
   Ramping strip, 50mm wide to suit the 10mm matting system.
   

SCREED base of mat recess level with inside frame ledge, to support the mat.