 |
|
|
|
|
|
|
| |
Home >
DORMA Automatics >
Dorma Frameless Glass Operable Wall System HSW
DORMA FRAMELESS GLASS OPERABLE WALL SYSTEM HSW
Technical Data :
Index |
|
| |
max. height of system
mm |
max. width
mm |
max. panel weight
kg |
| Double action end panel |
4000 |
1250 |
150 |
| Sliding panel |
4000 |
1250 |
150 |
| Double action sliding panel with RTS size 2 |
3600 |
1100 |
100 |
| Double action sliding panel with RTS size 3 |
3600 |
1250 |
100 |
| Double action sliding panel with BTS |
3000 |
950 |
75 |
| Single action sliding panel with TS 92 |
3600 |
1250 |
100 |
BTS = floor spring, RTS = transom closer, TS = door closer
Ideal size for maximum ease of operation: approx. 800x2500mm.
The individual panels can also be designed with different widths, the largest being max. 15% wider than the smallest.
The arrangement of the sliding panels in the stacking area will be geared to requirements dictated by the smallest panel width.
 |
|
DORMA HSW-G sliding shopfront systems are made up of the following components:
- Track (2) for direct bolting to a steel girder (1) or similar on the ceiling
- top (6) and bottom (8) rails composed of base rail, clip-on covers and end caps, which are clamped onto the toughened glass panels (7)
- rollers (3), carriers (4), and carrier profiles (5) which ensure that the panels slide easily with minimum effort
- stacking areas, in which the sliding panels are neatly and compactly stacked when the shopfront is opened.
Stacking areas
Most popular stacking layout, where the end panel might be a swing door. A practical and easy to use arrangement.
|
|
|
All products contained herein © DORMA Automatics. Page layout © 1996-2008 Architecture Media (Selector) Pty Ltd.
All rights reserved.
|
|
|
|
Photographs