• Operator to have an electric lock fitted, to lock the doors via the drive train. Electric lock to incorporate battery reserve, rechargeable circuits and all associated wiring, battery and charger monitor, keyed mode and emergency exit switches.

The Operator must have positive electric braking; fully adjustable speed control with independent settings for open/close and on final speed on both opening and closing. Selectable fire alarm interfacing; automatic re-closing circuitry to ensure doors re-close if partially opened; automatic reversing if obstructed during closing sequence with fully adjustable sensitivity setting, automatic stop and retry if obstructed during opening sequence at a predetermined programmable time and speed.

The Operator is to be actuated by two BWND MDS microwave directional movement sensors as standard equipment. Dual sets of jamb fitting high gain, (up to 15m), flush mounted photo electric cells that will prevent the door from closing if the threshold area is obstructed. A four-position mode switch to select the following functions, Auto/Exit/Hold open/Lock. Keyed mode and emergency exit switches to be provided as required.

Intermediate selectable opening widths or / climate control facility, and ability to provide operational data outputs to building security system.

The Operator is to incorporate a failsafe device to fully open doors on power failure or on fire signal in accordance with the Building Code of Australia and AS4085.

For further information, or specification of the product please contact your Dorma Automatics Architectural Representative via the email link provided.