 |
|
|
|
|
|
|
| |
Home >
Cableduct Systems >
140 Series Floor Boxes
140 SERIES FLOOR BOXES
Specify Product :
Index |
|
Suggested Specification:
The electrical contractor shall allow to supply and install a Model No. FFOB-14(4,5,7 or 8) Flush Floor Outlet Box from Cableduct Systems (Tel:1300 30 22 49) where detailed on the drawings and as described below.
The flush floor outlet box cover shall be of stainless steel / brass appearance with a cover size of 145x145mm. The cover shall allow cables to exit the unit when closed and in use.
Floor boxes are to be conduit fed and house one outlet plate as detailed on the drawings. Outlets shall be standard size and of a type as nominated by this document. Blank plates shall be fitted to any unused outlet positions. Conduit size and type shall be as detailed on the drawings.
The steel floor box housing is to be positioned to finish flush and level with the final slab surface and secured to prevent movement within screed/structural slab during concrete pour. A temporary cover shall be fitted over the steel box body during the construction period to prevent damage to the unit prior to the installation of floor coverings.
The floor box cover is to be installed after the floor coverings have been laid.
The system shall be earthed in accordance with AS 3000 wiring rules and conform to Austel requirements. Installation shall be performed by qualified and experienced tradesmen in a first class manner generally as described in Cableduct Systems ‘140 Series General Guide to Installation’. |
All products contained herein © Cableduct Systems. Page layout © 1996-2008 Architecture Media (Selector) Pty Ltd.
All rights reserved.
|
|
|
|
Photographs