 |
|
|
|
|
|
|
| |
Home >
BlueScope Steel >
Zincalume® Steel for Roofing
ZINCALUME® STEEL FOR ROOFING
Colours & Textures :
Index |
|
Paint Products ZINCALUME® Steel
ZINCALUME® steel can be readily overpainted. Prior to painting, the surface of the ZINCALUME® steel needs to be cleaned. This can be achieved using a mop or soft bristle brush with detergent and water. The surface should then be hosed down thoroughly with water and allowed to dry.
If the surface is new it may contain some residual lubricants from the roll forming process. They should be removed using the procedure above.
When the surface of the ZINCALUME® steel is clean and dry, it can be directly overpainted using 2 coats (preferably) of a good quality water-based Acrylic.
Please follow the manufacturer's instructions and, if required, confirm the suitability of the selected paint system for the collection of drinking water with the manufacturer.
Aged ZINCALUME® steel can also be painted. It should be cleaned, greasy deposits should be removed with a suitable solvent and any loose corrosion product removed by wire brushing. Painting can be undertaken as mentioned above. The paint manufacturer should be consulted regarding the need to prime the ZINCALUME® steel first.
|
All products contained herein © BlueScope Steel. Page layout © 1996-2008 Architecture Media (Selector) Pty Ltd.
All rights reserved.
|
|
|
|
Photographs