 |
|
|
|
|
|
|
| |
Home >
BlueScope Lysaght >
Residential Roof Cladding
RESIDENTIAL ROOF CLADDING
Specify Product :
Lysaght Custom Blue Orb® |
|
|
Lysaght Custom Blue Orb®
|
Suggested Specification
The roofing shall be ........ mm BMT LYSAGHT CUSTOM BLUE ORB®.
Sheeting shall be made from material conforming to AS1397 [G550-AZ150] and AS2728 [COLORBOND steel]
The sheeting shall be fixed to the purlins/girts in accordance with the manufacturer's recommendations. Fasteners shall comply with AS3566 Class 3 for exterior applications XRW - Climaseal or Zacs 4, XSE-Zacs 4. Sheets shall be laid in such a manner that the approved side lap faces away from the prevailing weather. A minimum of 50mm shall be provided for projection into gutters. Flashings shall be supplied in compatible materials as specified, minimum cover of flashing shall be 150mm.
All sheeting shall be fixed in a workman like manner, leaving the job clean and weathertight.
Repair minor blemishes with touch-up paint supplied by the roof manufacturer.
All metallic swarf and other debris shall be swept from the roof area
and gutters regularly, at the end of the day and at the completion of the
installation.
Ordering
For problem-free bullnosing, remember the following
points when ordering:
- Use a template to describe the degree of curve you require.
- If you have a combination of BlueScope CUSTOM ORB and CUSTOM BLUE ORB, ensure they are ordered together so that they will correctly lap when laying.
Important Note
There is at least 100mm at the end adjacent to the
curve which cannot be curved. This must be taken into account when measuring.
|
|
|
|
All products contained herein © BlueScope Lysaght. Page layout © 1996-2008 Architecture Media (Selector) Pty Ltd.
All rights reserved.
|
|
|
|
Photographs