 |
|
|
|
|
|
|
| |
Home >
Atlantis Water Management >
Tank Systems
TANK SYSTEMS
Technical Data :
Re-use tank system |
|
|
Re-use tank system
|
Atlantis Rainwater Re-use Systems provides a method of collecting and cleaning storm water from surfaces including roofs and roads to supply clean and regular water for reuse in situations including domestic and landscape applications. The advantages of the Atlantis system is that it filters water before it is stored and can deal with the recycling opportunities of infiltration, and recycling all in one system.
It is becoming increasingly obvious to most governments around the world that the cost of providing a usable water supply is increasing rapidly. Decaying infrastructure and storm water system pollution is not only contaminating ecosystems but this valuable source of water is literally going down the drain. Recent scientific reports are indicating that by 2010 over two thirds of the worlds’ population will not have access to clean water.
In domestic applications the Atlantis Rainwater Reuse System can be designed in the same manner as other On-Site-Detention Systems by merely replacing the storage area with Atlantis Rainwater Tanks. In the Atlantis system the Atlantis Filtration Unit filters all storm water run-off from roofs prior to entering the storage tanks. The use of the Atlantis Filtration Unit is an important factor in ensuring a safe, efficient and maintenance free system. Typical applications for the Atlantis System are toilet flushing, washing machine water and watering the garden.
In urban re-use situations the Atlantis Rainwater Re-use System is proving effective in providing a regular clean water supply for landscape area irrigation. The Atlantis System uses EcoSoils to purify highly contaminated stormwater road run-off for capture in Atlantis Rainwater Tanks. Clean water can then be used to irrigate landscape areas and gardens.
Matrix™ Tank Modules
The Matrix™ Tank Modules are suited to any subsurface infiltration or retention applications.
Manufactured using recycled materials, the Matrix™ Tank Module is a lightweight structural component developed through years of research & development.
It is ideal for the construction infiltration tanks, re-use tanks, sub surface channels and light weight void spaces for rooftop gardens and planter boxes
| Product No. |
Dimension |
Flow Rate |
Units per/m3 |
| 70003 |
685x450x408mm |
2280l/min |
8 boxes / m3 |
| 70004 |
685x880x408mm |
4560 l/min |
4.06 boxes / m3 |
| 70005 |
685x1310x408mm |
6840 l/min |
2.73 boxes / m3 |
|
|
|
All products contained herein © Atlantis Water Management. Page layout © 1996-2008 Architecture Media (Selector) Pty Ltd.
All rights reserved.
|
|
|
|
Photographs