 |
|
|
|
|
|
|
|
Home >
Aqva Design >
Baths & Spa Baths
BATHS & SPA BATHS
Install, Maintain :
Index |
|
Aqva Design baths and spas are designed to provide flexibility and easy access for service and cleaning. All spa baths must use the Aqva floor waste or the Aqva removable plug and waste systems. For bath only installation, a standard 40mm plug & waste should be fitted.
For installation where future portability and ease of cleaning is required, install the Aqva floor waste into the bathroom floor beneath where the proposed waste outlet of the bath will be located.
Aqua Design spa baths have the pump mounted between the inner and outer shells. The electrical plug and lead is accessed from beneath the bath, and must be connected into an approved waterproof power point or hard wired into a junction box no less than one meter from the bath. All 8 and 9 jet systems require a 10 amp power point and 12 jet systems require a 15 amp power point if supplied with a hot pump.
MAINTENANCE
Never use abrasive or bleach based cleaners. Refer to brochure for more information. |
All products contained herein © Aqva Design. Page layout © 1996-2008 Architecture Media (Selector) Pty Ltd.
All rights reserved.
|
|
|
|
Photographs